Browsing Tag

Company: My Favorite Things

Season’s Greetings with Winter Owl

Handmade Cards, Seven Hills Crafts DT
Winter Owl (Lawn Fawn)

Hello and happy Wednesday! I’m on the Seven Hills Crafts blog again today with some festive inspiration!

I promised myself this year that I would take out some of the older stamps in my stash so I could revive and get the most use out of them. I hate to think that some of the cutest stamps stay hidden away, never to see the front of a card again! This week I chose the Lawn Fawn Winter Owl

Winter Owl (Lawn Fawn)

I started out with an A6 card base of Bristol Smooth card, treating it with a powder tool before stamping the Lawn Fawn Winter Owl repeatedly in some Versamark Ink until the panel was covered. I then sprinkled on some gold embossing powder and heat set. I took out my Zig Clean Colour Real Brush Markers in festive shades of green, red and brown, colouring in the owls and pulling out the colour with my water brush. I used two markers for each colour to give some depth to the colouring.

Winter Owl (Lawn Fawn)

For the greeting, I used a sentiment from the MFT Snow Globe Sentiments set, white heat embossing onto some kraft card stock and trimming the edge into a banner. I needed some matching card strips to mount the sentiment so I coloured some scraps with the red and green markers, adhering these to the panel beneath the foam mounted sentiment strip.

A bright and festive card that revived one of my older-but-never-forgotten sets! Check out this month’s DT inspiration post for the Monthly Challenge to see an alternative colour combination using metallics.

Thanks for reading!

 

    

Frosty Snowflakes

Handmade Cards, Seven Hills Crafts DT
Frosty Snowflakes

Hello everyone and a happy Wednesday to you! I’m on the Seven Hills Crafts blog again today and I am sharing some frosty snowflakes. Snowflakes are always a Christmas classic and I think this design would be easy to replicate if anyone still needs to create some last minute cards!

I started out with ink blending some blue tones onto a white A6 card base, splattering with some clean clear water to give that frosty effect.

Whilst I left the background panel to dry I die cut a stack of the MFT Let it Snowflake Too Dienamics and Lawn Fawn Scripty Merry Dies from some white card stock. I adhered several of the Merry die cuts together for dimension, covered with Versamark ink and heat embossed with some silver embossing powder. 

Frosty Snowflakes

I adhered the snowflakes to the back panel, scattering them across the card and trimming any overhanging crystals. I added a black banner across the centre of the card to make the silver die cut stand out. A white heat embossed sentiment from the Lawn Fawn Merry Messages set on another smaller piece of black card, trimming one edge into a banner.

Thanks for reading!

Tallie

Bearful of Holiday Happiness

Handmade Cards, Seven Hills Crafts DT
Bearful Holiday Happiness (Neat & Tangled)

Hello crafters, I am back today with another Christmas card for you. I’m definitely making a dent in the stack of cards I need to send this year so I hope you’re not too sick just yet of my festive sharings!

My card today features two stamps that seem to be a favourite of my muse this year: Neat & Tangled Beary Merry and MFT’s Bold Diagonal Stripes Background. The background stamp is so versatile – stamp it in black for a backer for almost any card panel, or stamp it in red to replicate a candy cane! It was the latter that inspired me today. I started out with an A6 top-folding card base on which I stamped the striped background in some Lawn Fawn Lobster ink. I also cut a snowy hill out of some white cardstock with one of the Lawn Fawn Stitched Hillside Borders dies, adhering this to the bottom of the card base.

I stamped out the bear and the cute little Santa mug from the Neat & Tangled Beary Merry set with some MFT Black Licorice Hybrid Ink, colouring them in with my alcohol markers in some traditionally festive colours. One of my favourite things about this set is that the coordinating dies cut out the bear’s hands so you can adhere items like the mug to make it look like he’s holding on to it. After adhering the bear with some foam tape over the snowy hill, I added some trees I had leftover from a previous project using the Mama Elephant Me and My Yeti set.

Bearful Holiday Happiness (Neat & Tangled)

The sentiments from this set are fabulous so I felt I had to make it a little more special. I gold heat embossed the ‘wishing you Holiday Happiness‘ sentiment from the set on some green card stock before poking a hole on either side and threading through some Lawn Fawn Lime Twine. I adhered this with some foam tape centered on the striped panel and tied off the twine on the inside.

A little Wink of Stella to give it some shine and I think this makes a bright and cheery Christmas card!

Thanks for reading. I’ll catch you next week with something a little less festive!

Tallie

Jungle Gym with MFT

Handmade Cards, Seven Hills Crafts DT
Jungle Gum with MFT

Happy Wednesday! It’s the first day of November and I am on the Seven Hills Crafts blog today with a colourful critters card that can be used for a variety of occasions. I’ve had the MFT Jungle Gym set for a while and I challenged myself to combine it with a Christmas stamp. It didn’t quite turn out the way I planned, but then the best cards never do!

Jungle Gum with MFT

I started out by stamping the cute swinging monkey/tiger and bird from the MFT Jungle Gym set onto some Copic friendly 210gsm ClareFontane DCP paper with some MFT Black Licorice Hybrid ink. I then coloured them in with my Copic markers using at least three shade for each colour to get some depth. I tried to stick to the brighter, warmer colours as I knew the background would be cooler blues. I cut these out with the coordinating dies, added a few accents with a white gel pen and a layer of clear Wink of Stella. I mounted these with some foam tape and set aside to work on the background.

To make the background, I blended some Faded Jeans, Broken China and Cracked Pistachio Distress Oxide ink onto some smooth white cardstock. I then spritzed some water onto the ink and dried with a paper towel to give that wonderful chalky finish. I trimmed it down so it was just smaller than the A6 side-folding cardbase and adhered it at a jaunty angle. I felt it needed a little more something so I used a white gel pen to draw on faux stitching around the outside.

Jungle Gum with MFT

For the sentiment, I used the ‘for you’ from the MFT Hand Lettered Christmas set. I stamped it out with some black ink and fussy cut around the sentiment. To make it look a little more dimensional, I used my white gel pen to add some highlights on the left and top sides of each letter. I then also mounted this with foam tape and adhered to the background in line with the tiger’s feet. A few crystal clear sequins sweeping through the bottom right to top left of the card helps to give the impression of movement for the swing.

This makes a nice little all-occasions card I can add to my stash!

Thanks for reading, catch you next week.

 

  

 

 

Mermazing Porthole with MFT

Handmade Cards, Seven Hills Crafts DT
Mermazing (MFT)

Hello and happy Wednesday! I’m on the Seven Hills Craft Blog again this week with a colourful mermaid window card. It’s been a long couple of weeks at work and I needed some colouring therapy, so this background from MFT gave me the perfect opportunity to sit down and escape for a while.

I started by stamping the sitting mermaid from the MFT Mermazing stamp set with some MFT Black Licorice Hybrid ink, creating a mask for her so I could stamp the rock underneath. I also masked the rock so I could stamp the MFT Wavy Coloring Book Background. I then spent a happy half an hour colouring it all in with my Copic markers (Mermaid: Rs, YGs, Es, Vs, Ys, WGs; Background: BGs, Bs). I had fun colouring this one, exploring depth of colour and shadows in all the nooks and crannies of the background. It was a great opportunity to practice! It was almost a shame to cut it down to A6 size so it would fit on a card base.

Mermazing (MFT)

To make the card base, I took a top folding A6 card base and adhered my coloured panel to the inside. I then used the second largest die from the MFT Inside & Out Stitched Circle STAX Dienamics to cut a window from the front of the card, making made sure to align this with the mermaid so she would be seen through the window. I adhered some acetate to the back of the front panel so I had a little window card looking through to an undersea grotto.

I cut out a few more circles of varying sizes and inked them up with colours that coordinated with my coloured background. I arranged them on the front panel so they looked a little like bubbles and stamped the sentiment from Lawn Fawn’s Critters in the Sea set.

 

Supplies